News

Algerian group COSIDER and SAMSUN MAKINA SANAYİ A.Ş signed a deal

Algerian group COSIDER and Turkish company SAMSUN MAKINA SANAYİ A.Ş signed on 2nd of March, 2019 in Algiers, a deal on the construction of a ductile iron pipe manufacturing plant in the industrial area of Sidi Khettab (Relizane) and groundbreaking ceremony was done on 5th of March, 2019.

The agreement was signed by the General Director of the Cosider Group, Lakhdar Rakhroukh and the Managing Director of the Turkish company Yusuf Adnan YÜCEL, in the presence of Minister of Finance Hocine Necip, Minister of Industry and Mines Youcef Yousfi.

At the first phase, the production capacity of the plant is estimated at 100,000 tons annually – between DN80-DN1200 diameter ranges. The plant that be built on an area of 33 hectares is planned to complete within 18 months. This amount of production allows for national market needs and export orientation to foreign markets.

(March, 2019)

1st International Drinking Water and Wastewater Symposium

Samsun Makina was participated in the 1st International Drinking Water and Wastewater Symposium held in Afyonkarahisar on 06-07 December 2018 and organized by the General Directorate of State Hydraulic Works (DSİ). Our stand was visited by Mr. Akif ÖZKALDI, Deputy Minister of the Ministry of Agriculture and Forest, Mr. Mevlüt AYDIN, General Director of DSI, Mrs. Şadiye YALÇIN and Mr. Kaya YILDIZ, Deputy General Directors of the DSI.

In this symposium, Osman YILDIRIM, Deputy General Manager of Samsun Makina Sanayi A.Ş contributed to the symposium with his presentation on "Sustainable Intelligent Water Management for Intelligent Cities".

(January, 2019)

Kampala Drinking Water Line Project (Uganda)

Within the scope of the Kampala drinking water line project in Uganda, shipments are made by sea for the pipe manufacturing. Up to now 2 shipments have been successfully carried out. Shipments will continue in 2019.

Within the scope of the project, a total of approximately 52 km of ductile pipe is produced and transported simultaneously. The ductile pipes produced for the project are of two types in connection with the standard type and with anchored joint.

(January, 2019)

Water Services Corporation – Malta Project

Within the scope of the Water Services Corporation - Malta Project, 16.344 meters of ductile pipe production between DN80 and DN250 diameter has been completed and the first shipment was made at the end of 2018. Shipments will be continued in 2019.

(January, 2019)

BASKİ Committee was performed a visit to our Adana Ductile Iron Pipe Factory

BASKİ (Balıkesir Water and Sewerage Administration) Committee was performed a visit to our Adana Ductile Iron Pipe Factory on 30th of June, 2018. The Committee was informed about ductile iron pipe production, testing and shipment stages. In addition, a presentation was given about the other products of Samsun Makina Sanayi A.Ş.

(June 2018)

Transportation

The domestic and international transportation of the ductile iron pipes that are produced in Samsun and Adana Factories organizes by by ship, highway or railway successfully.

(June 2018)

NIGERIA LOT 2 - Baden Network Project

Various diameters

  • DN250 Ductile Pipe - 4 km
  • DN300 Ductile Pipe - 19 km
  • DN350 Ductile Pipe - 1,7 km
  • DN400 Ductile Pipe - 150 m
  • DN500 Ductile Pipe - 5 km

Pipe and fittings productions were completed, they were dispatched and their installations were completed successfully within 2018.

(June 2018)

SMS Adana Factory (Adana)

By the year of 2018, production and dispatching of ductile iron pipes that have various diameters are still continuing from Adana factory for the Ministries and contractors.

(June 2018)

İSKİ (İstanbul)

Pontoon pumping station that was produced and installed for İSKİ with 750.000 m3/day capacity is operating successfully until now.

(June 2018)

İSU (Kocaeli)

The contract of the "Purchasing of ductile iron pipes and fittings with various diameters" was signed; the manufacturing and dispatching will be done at certain intervals.

(June 2018)

KASKİ (Kayseri)

The contract of the "Purchasing of ductile iron pipes and fittings" was signed and the manufacturing and dispatching was completed immediately.

(June 2018)

İncekaya İnşaat – Samsun Makina Sanayi A.Ş JV

Related ductile pipe and fittings productions of "construction of KKTC Drinking Water Project Storage Tank Connection Part-1 that was tendered by DSİ-Department of Water Supply" were started in 2017. The production and dispatching of the all products were completed.

Also, all pipe installations in the scope of the project were completed within 2018. The start-up period is still continuing on site.

(June 2018)

ESKİ (Erzurum)

By force of the contract of ESKİ (Erzurum)- Ductile iron pipe and fittings purchasing project, all shipment procedures were completed within 2018.

(June 2018)

MUSKİ (Muğla)

The contract of "Purchasing of Ductile iron pipes and fittings in various diameters" was signed and the manufacturing and dispatching was completed within 2018.

(June 2018)

ŞUSKİ (Şanlıurfa)

The contract of "Purchasing of Ductile iron pipes and fittings" was signed and the manufacturing and dispatching was completed within 2018.

(June 2018)

Contractor Firms

Ductile Iron Pipe and fitting supplies are continuing to contractors for DSİ, İlbank and Municipality projects.

(June 2018)

The opening ceremony of SMS Adana Manufacturing Plant

The opening ceremony of SMS - Adana Manufacturing Plant located in Adana Organized Industrial Zone to manufacture ductile iron pipes with diameters ranging from DN80 to DN2600 was held with the honorable participation of the President of the Republic of Turkey.

Welcomed the President

Our Chairman of the Board welcomed the President, he was then presented with flowers by our workers upon arrival to the factory.

Informed the President and his Ministers

Our Chairman informed the President and his Ministers about SMS - Adana Manufacturing Plant.

OSKİ Workshop, 7th of February 2015 / Turkey

A technical committee from OSKİ Head Office performed a visittoour Samsun Factory on 7th of February, 2015. A presentation was made about our products and productionflow. Besides, the committee was taken to an ongoing project of SASKİ Head Office, and had a chance to see ductile iron pipe application on site.

Al Nacaf Kufa Project MMPW / Iraq

To supply potable water need of Al NacafKufa Project MMPW, a total of 43.000 meters in the diameter range of DN600 – DN1500 will be produced and delivered in 2015.

IPA Projects / Turkey

In the scope of the Bulancak, Manavgat, Erzincan, Doğubeyazıt, Akçaabat and Erciş Projects run by The European Union Investments Bureau Secretary of The Ministry of Environment and Urban Planning, supply of pipe and valve to the contractor firm is in progress.

Pechea – Galati / Romania

Production and shipment of a total of 5000 meters Class C25 DI pipe in the diameter range of DN1000 – 1200 will be provided for the Pechea Galati Project in 2015.

SASKİ – Acil, Potable Water Supply Plant / Turkey

Production and shipment of a total of 5000 meters of DN1000 DI pipes have been provided to supply potable water need for Acil, Samsun.

DSİ Potable Water Workshop / Turkey

The DSİ Potable Water Workshop was performed on 24th of November, 2014 in Antalya with the participation of Head of Water Supply Department. Our company took part at this workshop in order to make a presentation about ductile iron pipes and its installation.

Ceyranbatan Project / Azerbaijan

Production and shipment of pumps with 8m3/s 130 mWc capacity and a total of 1044 pieces of different types of valves, check valves, and air relief valves in the diameter range of DN250 – DN2200 have been provided for the Ceyranbatan potable water treatment plant in order to supply potable water need of Baku.

Kırkuk Project / Iraq

Supplying a total of 48.000 meters of DI pipes and its fittings, in the diameter range of DN300 – DN1000will be done for the Kırkuk Project in 2015.

Tblisi / Georgia

To supply potable water need of Al NacafKufa Project MMPW, a total of 12.000 meters of class C25 DI pipe in the diameter range of DN200 – DN250 were produced and delivered.

China Bridge, Belgrade & Water and Sewerage Programme in Medium Sized Municipalities & Vodovod Berane, Montenegro / Serbia

Sırbistan'da gerçekleşen China Bridge, Belgrade & Water and Sewerage Programme in Medium Sized Municipalities ve Vodovod Berane, Montenegro projelerine toplam 10.000 metre DN150 – DN800 çap aralığındaki boru ve ek parçalarının tedariki firmamızdan tarafından teslim süresine uygun olarak tamamlanmıştır.

Mestia Water Supply Project / Georgia

A total of 10.000 meters DI pipe were produced and delivered for the Mestia Water Supply Project by the end of 2014.

AIN Kercha Project / Algeria

Supplying a total of 648 pieces of different types of valves and air relief valves in the diameter range of DN50 – DN1800 and 112 pieces of dismantling joint with the pressure class PN 10 - 16 – 25 were done for the AIN kercha Project at the end of 2014.

Consorzio Bonifica Vallo Project / Italy

A total of 2000 meters DI pipe in the diameter range of DN800 – DN1200 and fittings were produced and delivered for the Consorzio Bonifica Vallo Project.

OSKİ – Ulubey, Intake Structue and Potable Water Tranmission Line Construction / Turkey

A total of 17.000 meters DI pipe in the diameter range of DN150 – DN300 and fittings have been produced and delivered in accordance with delivery schedule.

Musabeyli (Yozgat) Storages, Pump Station ve Tayip Regulator, Treated Water Distribution Lines Potable Water Project / Turkey

A contract for supply of pipes, valves and pumps have been signed with the contractor firm of Musabeyli (Yozgat Potable Water) Project Treated Water Distribution Lines, Reservoirs, Pump Stations and Tayip Regulator job. SMS provides DI pipes in the diameter range of DN400 – DN1500, pumps, valves, electrical works and scada system for the aforementioned project, and installation.

İSU - Kandıra Namazgah Dam,Potable WaterTreatment Plant / Turkey

Supplying a total of 90.000 meters of DI pipes and its fittings, and a total of 300 pieces of different types of valves in the diameter range of DN50 – DN400 were done for the Kandıra Namazgah Dam Potable Water Treatment Plant tender.

DSİ – Bitlis, Potable Water Transmission Line Construction / Turkey

DI pipes in the diameter range of DN400 – DN1500 and its fittings, and pump and valves were provided by our company for the DSİ Bitlis potable water transmission line.

Marmaray Project / Turkey

A total of 40.000 meters of fire and drainage mains in the diameter of DN100 – DN300 were produced and delivered.