Application
- For trouble
free pumping of clean or slightly impure, dirty, non-aggressive liquids containing
which do not contain solid particles
| - General
water supply for agriculture, trade and industry irrigation and drainage
|
- Hot water, cooling water,
condensate or oil transfer in heating and cooling circuits
|
- Chemical
Industry (oil, brane), food industry, gas filling stations
|
Performance
Range
- Capacity
: up to 450 m³/h
- Head
: up to 90 m
- Discharge
Flange : Ø 32 - 150 mm
- Operating
Pressure : up to 10 kg/cm²
- Operating
Temperature : 105° (145° with cooling jacket)
|  |
ConstructionHorizontal,
single stage, volute casting centrifugal pumps with integrally cast supporting
feet on the volute or with bearing pedestal. Main dimensions and nominal capacities
in accordance with DIN 24255 and NFE 44-111 or NFE 44-112. Suitable pump arrangement
for normal operating conditions with discharge flange vertically upwards. Hydraulically
balanced closed impeller eliminating end trust, and supporting bearings as grease
lubricated antifriction bearings. Shaft
sealing by means of soft packed stuffing box or by means of mechanical seals on
request. InstallationHorizontal
installation with direct-coupled electric motor by means of flexible coupling
or spacer type coupling to enable the dismantling of the complete bearing unit
without disconnecting the motor. Standard
Materials
| Volute
Casing : Cast Iron (gray/nodular) | | Impeller
: Cast Iron / Bronze | | Pump
Shaft : Steel / Cr-steel |
|
